CNC Setup Utility Manual
P/N 70000490C - Configuration Utilities
All rights reserved. Subject to change without notice.
10-December-04
4-3
Print Configuration
Use this feature to print the configuration file to a printer.
NOTE: If a printer is not connected to your parallel port, an Error
message is displayed.
1. See Map 2, Menu B. Highlight Print Configuration. Press ENTER.
2. Options Setup Menu F is displayed:
• Highlight Printer and press
ENTER. Press Yes (F1) to print to
your printer. Press No (F2) to return to Menu B.
– or –
• Highlight Text File (A:) and press
ENTER. P6MCFG.TXT will be
the filename. Press
Yes (F1) to print to the A:-drive. Press No
(F2) to return to Menu B.
– or –
• Highlight Text File (Other) and press
ENTER. Type the directory
and filename to which you wish to print.
To Next Page
Loading...
