CNC Setup Utility Manual
P/N 70000490C - Warranty
All rights reserved. Subject to change without notice. iii
10-December-04
Warranty
ANILAM warrants its products to be free from defects in material and workmanship for one (1)
year from date of installation. At our option, we will repair or replace any defective product upon
prepaid return to our factory.
This warranty applies to all products when used in a normal industrial environment. Any
unauthorized tampering, misuse or neglect will make this warranty null and void.
Under no circumstances will ANILAM, any affiliate, or related company assume any liability for
loss of use or for any direct or consequential damages.
The foregoing warranties are in lieu of all other warranties expressed or implied, including, but
not limited to, the implied warranties of merchantability and fitness for a particular purpose.
The information in this manual has been thoroughly reviewed and is believed to be accurate.
ANILAM reserves the right to make changes to improve reliability, function, or design without
notice. ANILAM assumes no liability arising out of the application or use of the product
described herein.
Copyright 2004 ACU-RITE COMPANIES, Inc.
To Next Page
Loading...
Need help?
General
