Anilam 6000M - Page 73

CNC Setup Utility Manual
P/N 70000490C - Machine Constants
All rights reserved. Subject to change without notice.
10-December-04
2-63
Table 2-2, Machine Constants Setup (Continued)
Machine Constant
Parameter
Function Settings
MC_4390:
Show Introduction
Screen
Displays the introduction splash screen.
Yes – Enable screen display.
[Default]
No – Skip the introduction screen.
The “System Options” main
menu is displayed.
M-Code Macro Call Parameters
MC_4400:
Mcode for macro
call #1
M-Code number you assign to call the
macro in MC_4401.
Range (0–99999)
0 [Default]
MC_4401:
Macro called for
Mcode #1
The macro number that is called when
the M-Code in MC_4400 is executed.
Range (0–99999)
0 [Default]
MC_4402:
Mcode for macro
call #2
M-Code number you assign to call the
macro in MC_4403.
Range (0–99999)
0 [Default]
MC_4403:
Macro called for
Mcode #2
The macro number that is called when
the M-Code in MC_4402 is executed.
Range (0–99999)
0 [Default]
MC_4404:
Mcode for macro
call #3
M-Code number you assign to call the
macro in MC_4405.
Range (0–99999)
0 [Default]
MC_4405:
Macro called for
Mcode #3
The macro number that is called when
the M-Code in MC_4404 is executed.
Range (0–99999)
0 [Default]
MC_4406:
Mcode for macro
call #4
M-Code number you assign to call the
macro in MC_4407.
Range (0–99999)
0 [Default]
MC_4407:
Macro called for
Mcode #4
The macro number that is called when
the M-Code in MC_4406 is executed.
Range (0–99999)
0 [Default]
MC_4408:
Mcode for macro
call #5
M-Code number you assign to call the
macro in MC_4409.
Range (0–99999)
0 [Default]
MC_4409:
Macro called for
Mcode #5
The macro number that is called when
the M-Code in MC_4408 is executed.
Range (0–99999)
0 [Default]
(Continued…)