Page 17 of 24
NOTE: Never use the vacuum cleaner with a wet or damp filter or without the
filter fitted.
Using a wet or damp filter will damage the filter, may cause serious damage
to the vacuum cleaner and will void your warranty.
Only wash the white filter if it is very dirty, otherwise just tap the edge of the
filter on a hard surface to dislodge any dust and debris.
To access the filters, first remove the dust canister from the vacuum cleaner
body as described in the section “Emptying the Dust Canister”.
Grasp the filter and pull up and out to remove.
Turn the filter over and remove the black foam filter for cleaning.
To Next Page
Loading...
