Command Directory 3-4 Commands
MG369xC GPIB PM PN: 10370-10374 Rev. F 3-111
SLP
Description: Opens the ALC power slope value parameter.
Functional
Category: POWER LEVELING
Front Panel Key: Level | ALC Loop | Edit Slope
SLV <value> <unit>
Description: Opens the power level parameter (L1) of the Secondary unit.
Same as SL1. Permits setting the L1 parameter for the Secondary unit. The power level
setting is determined by the power level range of the particular MG369xC model.
Functional
Category: PARAMETER ENTRY
Value: Power level range of the Secondary MG369xC model
Units: DM (Log), VT (Linear)
Front Panel Key: Frequency | CW | Primary Secondary > | Secondary L1
SM
Description: Recalls, in sequence, the next instrument setup stored in internal setup memory.
Functional
Category: STORED SETUP
Related
Commands: RSN(m), SSN(m)
Front Panel Key: N/A
SNRnnnnnnX
Description: Enter the instrument serial number.
Functional
Category: MISCELLANEOUS
Value: nnnnnn: the serial number must be six characters in length
Output Command: OAD1
The commands, *IDN? and OI, return the instrument serial number as part of the
identification string sent to the controller.
Front Panel Key: N/A
To Next Page
Loading...
Need help?
General
