Anviz CX7 - Network Settings - Ethernet

- 20 -
Network Settings - Ethernet
Network: Setup the terminal network connection. Include the
Ethernet, WiFi, Internet and Cloud connection.
Select “Ethernet” option to set up the IP/Network information for
the device via the network cable.
Option: Active or inactive the network communication based on
cable.
Retrieve IP Mode: Select “Static” for fixed IP or “DHCP” for
dynamic IP mode.
Static: Fixed IP address that doesn't change.
DHCP: A network server that automatically provide and assign IP
addresses, default gateway and so on.
Get DNS: Select between “Manual” or “Auto”.
Manual: Get the DNS by setup in the “Internet” option (11.3).
Auto: Get the DNS by local network system.
Network
Ethernet WiFi
Internet Cloud
Options
Retrieve IP mode
Get DNS
Manual
Static
Active
Ethernet
Device IP
Subnet mask
Gateway
255.255.255.0
192.168.0.1
192.168.0.31