- 28 -
Dead on Arrival ("DOA")
Hardware Safety Instructions
DOA refers to a state where the product does not work normally
due to an inherent defect that arose immediately after the
product’s shipment. Customers can be compensated for DOA only
within forty-five (45) days of the product’s shipment (applicable for
50 or fewer logs). If the product’s defect occurred within 45 days of
its shipment from Anviz, ask your technical support engineer for an
RMA number. If Anviz has received the defective product and the
case has been determined to be DOA after analysis, Anviz provides
free repairs provided that the case is merely attributable to
defective parts (the LCD, sensors, etc.). On the other hand, if the
case is attributable to a quality issue with an analysis period
exceeding three (3) days, Anviz provides you with a replacement
product.
Observe the following instructions to use the product safely and
prevent any risk of injury or property damage.
Do not use oily water or sharp objects to stain or damage the
display screen.
Fragile parts are used in the equipment, please avoid operations
such as falling, crashing, bending or heavily pressing.
The optimal working environment of CX7 is indoor. The device
function fully under temperature: -10°C~50°C (14°F~122°F),
The best performance is between: 15°C~32°C (59°F~89.6°F). The
device will be less effective if exceeds these ranges.
Please gently wipe the screen and panel with soft materials. Avoid
scrubbing with water or detergent.
The recommended power of CX7 terminal is DC 12V ~ 2A. The
device will function less effective in case the power supply cable
extends too long.
CX7 will turn on infrared filling light in case no ambient light
enough.
To Next Page
Loading...
Need help?
General
