21
3.5 When the transmission between the master unit and slave unit is
established, the < > lamp lights green.
4. Scanning the Master Unit Transmission Channels to Set
E3
+
transmitter is able to scan the radio reception status and set the master
unit’s transmission channel automatically or manually. When the channel is
set to “AUTO”, the channel with the best reception signal is automatically set.
When setting the channel manually, you can set the transmission channel
again while referring to the scan results.
4.1 Scanning while “AUTO” is set:
Press function button 4 to display
, and then function button
3 corresponding to . The channel is reset to one with a good
reception signal.
To Next Page
Loading...
