AWARD BIOS
3-12
Chipset Features SDRAM CAS Latency
Chipset Features SDRAM RAS# to CAS# Delay
SDRAM CAS
Latency
2T
3T
Auto
These are timing of SDRAM CAS Latency and RAS
to CAS Delay, calculated by clocks. They are
important parameters affects SDRAM performance,
default is Auto. If you install DIMMs with SPD and set
this item to Auto, BIOS will automatically detect your
DIMMs and then set to a appropriate timing; If you
use DIMMs without SPD and set this item to Auto,
BIOS will set it to 3/3.To make sure all of these
settings in BIOS are correct, it is recommended to
use DIMMs with SPD.
Chipset Features SDRAM RAS# Precharge
SDRAM RAS#
Precharge
2T
3T
Auto
The RAS Precharge means the timing to inactive
RAS and the timing for DRAM to do Precharge before
next RAS can be issued. RAS is the address latch
control signal of DRAM row address. The default
setting is Auto.
Chipset Features DRAM ECC Function
DRAM ECC
Function
Auto
Disabled
This lets you enable or disable DRAM ECC function.
The ECC algorithm has the ability to detect double bit
error and automatically correct single bit error.
Chipset Features Video BIOS Cacheable
Video BIOS
Cacheable
Enabled
Disabled
Allows the video BIOS to be cached to allow faster
video performance.
Chipset Features Video RAM Cacheable
Video RAM
Cacheable
Enabled
Disabled
This item lets you cache Video RAM A000 and B000.