EasyManua.ls Logo

Apach E Series - Specific Safety and Device Information; Oven Maintenance Safety; Oven Disposal Precautions; Noise Emission Information

Apach E Series
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
57
Oven maintenance precautions and adjustments
All regulation, inspection and cleaning should only be performed when the oven is off and not hot. No
operation is to be carried out when the electric equipment is live. It can cause serious or even fatal injury.
If the guards or the safety devices have been removed, make sure they have been re-installed before
using the oven again.
Adjusting or maintenance operations without safety devices or carters must NOT be carried out.
After any maintenance, adjustment or repair operation, before restarting the machine, the chief technician
must check that the activities are finished and the safety devices are put in working order
Oven disposal precautions
In case the machine comes to the end of its productive cycle and is to be demolished, its components
have to be disposed of, according to the laws in force.
Noise precautions
The EDISON oven produces an acoustic pressure level below 80 dB (A).
The personnel operating on the machine do not need to wear individual hearing protections unless
required by the operating environment.
3.3.
PROTECTION AND SAFETY DEVICES
The oven E series is designed in such a way that all parts at high temperature are rendered
harmless by the use of suitable safety systems or clearly indicated. Consequently,
company Equip Group. is relieved from any responsibility in case of damage caused by
tampering with these devices.
The door is fitted with a handle made out of material that does not conduct heat.
All parts at high temperature are insulated with fiberglass or asbestos-free insulating materials
The electrical equipment ensures protection of persons against electrical discharge from direct or
indirect contacts, as laid down in the CEI EN 60204-1 legislation
All electrical parts with dangerous power ratings and voltage are in the right side of the oven covered
by a metallic carter.
All edges and corners both inside and outside the chamber have been rendered harmless.
3.3.1. SAFETY SIGNALS USED IN THE MANUAL
Danger sign
Mandatory sign
“TAKE GREAT CARE”
"USE THE HEAT-
PROTECTION GLOVES"
“HIGH TEMPERATURE
SURFACES"
“USE PROTECTIVE
FOOTWEAR”
“USE A PROTECTIVE
HELMET

Table of Contents