6-2. LCD Display
Applicable Model : iX Auto
Disassembly Steps:
1. Remove the 4 screws under the bottom and top cover can be separated <Refer to 6.1>.
2. Squeeze both sides of the screen bracket and make 2 buckles under the screen separately.
3. Remove the FFC cable.
Assembly Steps:
1. Make sure the Wi-Fi cable needs to be assembled to the bottom and the FFC cable should be presented
S-shape under the screen.
2. According to the disassembly steps, assemble the LCD displaying in reverse order.
3. The LCD Display connector should be buckle up tightly.
To Next Page
Loading...
