What to do if my Apex Digital iX Control Unit is showing Error E101-07?
If the device displays error E101-07, check for any damage in cable connections related to the heating humidifier. If the issue persists, replace the heating plate. If it still remains, replace the heating humidifier mainboard.
Why is there no air flow through the mask of my Apex Digital iX?
If there's no air flow through the mask, first, check that the power cord is properly connected and the device is turned on. Next, ensure the heated tubing is correctly connected. Finally, check for and unblock any obstructions in the air tubing.
Why is my Apex Digital iX showing 'Low P icon'?
The 'Low P icon' may appear if the mask isn't properly fitted. Make sure the mask fits securely on your face. Also, check the tubing for any damage and ensure it's properly connected. Inspect the pressure and flow sensor tubes to confirm they are correctly connected.
What to do if my Apex Digital iX displays no display or incorrect display?
If there is no display or an incorrect display, check if the power cord is connected to the power socket. If it is, the issue may be due to LCD or controlled PCB failure, in this case replace the LCD. If the problem persists, replace the mainboard.
What to do if my Apex Digital iX Control Unit is showing Error E101-08?
If error E101-08 appears, reconnect the heated humidifier. If the problem persists, replace the heating plate. If the issue still remains, replace the humidifier mainboard.
Why date cannot be copied to the SD card of my Apex Digital iX Control Unit?
If data cannot be copied to the SD card, check if the SD card is provided by APEX or check the SD card format (FAT32). Also, verify if the SD card is full and clear space for new data. If the issue persists, the data on the SD card may be corrupted; format the card or use a new SD card.
What to do if my Apex Digital iX is showing Error E101-01?
If error E101-01 is displayed, first reset the device. If the problem remains, the mainboard may need to be replaced.
What to do if my Apex Digital iX Control Unit is showing Error E100-002?
If the device shows error code E100-002, restart it. After restarting, enter the Setting mode and select About to verify if the software version is displayed. If the problem persists, the 4G module may need to be replaced.
What to do if my Apex Digital iX is showing Error 002?
If Error 002 is displayed, verify the SD card format is FAT32. Also, ensure the SD card is properly inserted into the slot and has sufficient capacity. If the problem persists, consider replacing the SD module.
What to do if my Apex Digital iX Control Unit is showing Error 006?
If your device displays Error 006, ensure the cellular setting is turned on. If the signal remains weak, try replacing the 4G SIM card. Also, verify that the antenna connects to the 4G module board. If the problem persists, replace the 4G module board.
Explanation of special statements for operating and maintenance procedures.
Procedure for cleaning the device exterior and internal circuit parts.
Instructions for daily cleaning of the humidifier and its water chamber.
Guidelines for cleaning the air tubing, including checking for wear.
Procedure to separate the top cover from the device by removing bottom screws.
Steps for removing and replacing the LCD display module on the iX Auto model.
Instructions for removing and installing the mainboard for the iX Fit model.
Procedure for removing and installing the 4G and SD module board.
Steps for disassembling and removing the blower and air path module on iX Fit.
Steps for removing and installing the Wi-Fi board on iX Sense and iX Auto models.
Procedure for disassembling and removing the DC jack cable.
Steps for disassembling and installing the PCBA mainboard of the heated humidifier.
Procedure to calibrate pressure after replacing electronic components on iX Fit/Sense.
Steps to perform a pressure test to verify calibration on iX Fit/Sense models.
General| Brand | Apex Digital |
|---|---|
| Model | iX Series |
| Category | Control Unit |
| Language | English |
To Next Page
