6-7. DC Jack cable
Applicable Model : iX Fit / iX Sense / iX Auto
Disassembly Steps:
1. Remove the 4 screws under the bottom and then the device can be separated <Refer to 6.1>.
2. Pull up the mainboard and make the mainboard separated from device <Refer to 6.3>.
3. Pull out the blower and air path module together from the bottom cover < Step-3 to Step-9 please
refer to 6.5 >.
4. Pull up the DC jack cable.
Assembly Steps:
According to the disassembly steps, assemble the DC Jack cable in reverse order.
To Next Page
Loading...
