Apex Digital iX Series - 7-5 iX Series functional verification

7-5 iX Series functional verification
After replacing any electrical components, the following test processes will instruct you on verifying the
functions to ensure the device works properly.
WI-FI functions < applied for IX series 9S-010600 and 9S-010620 >
Steps
Description
Reference
Step 1
Plug the power connector into the rear of
the device.
Step 2
Press the Start Menu , and select the
Setting mode.
Step 3
Turn on the Wi-Fi function and also make
sure that Airplane Mode is off.
Step 4
Back to the main screen and make sure
that the icon of Wireless signal will display
at the top of your screen
Step 5
Enter into the Setting mode and select
About to verify if software version is
displayed.