Apex Digital iX Series - Page 53

Cellular communication functions < Only for iX series 9S-010620 >
Steps
Description
Reference
Step 1
Plug the power connector into the rear of
the device.
Step 2
Press the Start Menu , and select the
Setting mode.
Step 3
Rotate the Dial to Cellular function and
press Dial to turn it on and make sure that
Airplane Mode is turned off.
Step 4
Back to the main screen and make sure
that the 4G icon will display at the top of
your screen
Step 5
Enter into the Setting mode and select
About to verify if software version is
displayed.
<The picture is only for reference>