Chapter 8. Reset Total Meter
Applicable Model: iX Sense / iX Fit
Step 1: Plug in the adopter to the iX Sense.
Step 2: Long press the button and button, and the LCD will turn into the Rest Total Meter.
Step 3: Long press the and buttons and continue to press the button. The hint icon trash can
will start to blink.
Step 4: Press the button. The icon of ok will start to blink.
Step 5: Press the button. The Rest total meter will complete.
Applicable Model : iX Auto
Step 1: Plug in the adopter and press the button at the same time to enter Engineer Mode.
Step 2: Rotate the button to select the menu Reset TM Mode, and then press the button to
start Reset TM. While the Reset TM is completed, the LCD will show the icon of done.
To Next Page
Loading...
