PG10 Rev. B2, 8/16
18
Automation Products Group, Inc.
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
• Datalogging (dATLOG):
When datalogging is enabled, the PG10 will log the pressure readings, along
with the associated date/time stamps, at an interval determined by the Logging
Sample Rate setting (see page 20).
The PG10 can be congured to log continuously, based solely on the Logging
Sample Rate setting, or to log only when user dened pressure conditions exist
(event logging). The gauge will continue to log readings at the Logging Sample
Rate interval for as long as the event conditions persist.
The gauge can store a maximum of 60 records. Each record is logged in
a FIFO (rst-in, rst-out) buffer. This means that once the buffer is full (60
records), the oldest record will be overwritten by the next logged reading.
To Next Page
Loading...
