Rev. B2, 8/16 PG10
7
Automation Products Group, Inc.
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
Accessing the Setup Menu:
Step 1: Simultaneously press and hold and for approximately 3
seconds. This will bring up the 3 digit mode number.
Step 2: Using or to change the value of the ashing digit, and
to advance to the next digit, change the mode number to 000.
Step 3: Press to enter the setup menu, and press or to scroll
through menu choices.
Exiting the Menu System:
Step 1: While in the main setup menu, press or until EXIT is
displayed.
Step 2: Press to exit the menu system.
MODE
ENTR
ENTR
MODE
ENTR
To Next Page
Loading...
