APG PG10 - Viewing Logged Readings

PG10 Rev. B2, 8/16
24
Automation Products Group, Inc.
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
Viewing Logged Readings (VIEW):
The latest reading will be the rst record displayed when viewing the logged
readings.
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the options until dATLOG is
displayed.
Step 3: Press to enter the Datalogging menu.
Step 4: Press or to cycle through the options until VIEW is displayed.
Step 5: Press to access the logged readings.
Step 6: Press to cycle back through progressively older readings. will
cycle forward through progressively newer records.
Step 7: Press to exit the logged readings.
NOTE: When viewing a logged record, the time stamp of the record will toggle
momentarily to display the date stamp once every 8 seconds.
MODE
ENTR
ENTR
ENTR