PG10 Rev. B2, 8/16
34
Automation Products Group, Inc.
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
Parity (PARITY):
Sets the parity for the RS-485 communications. Options: None, Even, Odd
Setting the Communications Parity:
Step 1: Press to enter the main setup menu.
Step 2: Press or to cycle through the options until COMM is
displayed.
Step 3: Press to access the Communications settings menu.
Step 4: Press or to cycle through the options until PARITY is
displayed.
Step 5: Press to access the communication Parity setting.
Step 6: Press or to change cycle trough the parity options.
Step 7: Press to accept the return to the Communications menu.
MODE
ENTR
ENTR
ENTR
To Next Page
Loading...
