Apogee ensemble Quick Start Guide

10 | Ensemble Quick Start Guide
Powering the Unit On
1.Ensureanyspeakersorampliersconnectedtothe
outputsareturnedo,orthevolumeturnedtothe
minimum setting.
2. Press Ensemble’s Power button.
Afteramoment,theunitwillpowerup.
3. Power on or raise the volume level of any
speakersorampliersconnectedto
Ensemble’s outputs.
Powering the Unit O
PoweringtheEnsembleoisthereverseofpowering
the unit on.
1.Powero,orturnthevolumetominimum,
anyspeakersorampliersconnectedto
Ensemble’s outputs.
2. Press Ensemble’s Power button.
Note: Thunderbolt peripherals will continue
to operate when Ensemble is powered off.

Apogee ensemble Specifications

General

Type	Audio Interface
Simultaneous Channels	36
Phantom Power	Yes
Word Clock	Yes
Bit Depth	24-bit
Digital Inputs	ADAT, S/PDIF
Digital Outputs	ADAT, S/PDIF
Connectivity	FireWire
Inputs	8 analog
Outputs	8 analog