Apogee ensemble - Hardware Direct Monitor

Ensemble Quick Start Guide | 21
Toggling Phantom Power
Phantom power is required to use condenser microphones.
From the Front Panel From Maestro
1. Press and hold the
desired Input Select
button for at least
1 second.
1. Open Maestro and select the Input
tab at the top
(or use the keyboard
combination [command 1]).
2. At the bottom of the desired
inputchannel,clickthe“48”
button to toggle phantom
poweronoro.
2. Turn the Input knob
to highlight “48v”.
3. Press the Input knob to
toggle “ON” or “OFF”.