Apogee ensemble Quick Start Guide

Ensemble Quick Start Guide | 11
Update Ensemble’s Firmware.
1. Open Ensemble Thunderbolt Firmware Updater.app
located in your computer’s Applications > Utilities folder.
Afterthesoftwareinstallation,youmay
bepromptedtoupdatethermware.
2. Select “Update”.
3. Follow any prompts that may appear.
4. When the progress reaches 100%
andsays“UpdateComplete”,you
are done and can quit the updater.

Apogee ensemble Specifications

General

Type	Audio Interface
Simultaneous Channels	36
Phantom Power	Yes
Word Clock	Yes
Bit Depth	24-bit
Digital Inputs	ADAT, S/PDIF
Digital Outputs	ADAT, S/PDIF
Connectivity	FireWire
Inputs	8 analog
Outputs	8 analog