Apogee ensemble - Stage 1: Record Performance & Monitoring

Ensemble Quick Start Guide | 23
Using Maestro’s Mixer for Direct Monitoring
Ifyoudonothaveanyrecordingsoftwareopen,ordonotwanttouseitsmonitoringfunctionduetoissuessuch
ashighlatency,thenyoucanuseoneoftheLowLatencyMaestroMixersbuiltintoEnsembletomonitoryour
signal instead.
1. Disable input monitoring in your DAW.
2. Open Maestro and select the Output Routing
tab (or use the keyboard combination
[command 5]).
3. To monitor using speakers
connected to Ensemble’s
MonitorOut1&2,clickthe
left-most box next to Software
Output “35-36 Mixer 1”.
Now the signal from the
Maestro Mixer 1 will be
sent to your speakers.