Apogee ensemble - Getting Started with Audio Software

16 | Ensemble Quick Start Guide
Connect Speakers
The balanced Monitor Outputs 1 & 2 on Ensemble’s rear panel
arespecicallydesignedforconnectingstudiomonitors.
From the Front Panel From Maestro
1.Using1/4”TRScables,connectthe
leftmonitorspeakertoMonitorOut1,
and the right monitor speaker to Monitor Out 2.
2. Turn the Output knob to adjust
the volume to your speakers.
2. Open Maestro and locate the volume knobs in the
upper-right corner of the window.
3. Press the Output knob to
toggle the monitor output
muteonando.
3. Drag the speaker
volume knob up or down to
adjust the speaker volume level.
4. Click the mute button
next to the speaker
volume knob to toggle the speaker output’s mute
onoro.