Apogee ensemble Quick Start Guide

Ensemble Quick Start Guide | 17
Connect Headphones
Ensembleprovidestwoheadphoneoutputjacksonthefrontpanel.Bydefault,theseheadphoneoutputsmirrorthe
main monitor outputs 1 & 2.
From the Front Panel From Maestro
1. Connect to the headphone output with
a 1/4” Stereo headphone plug.
2. Turn the corresponding
Headphone Output knob
to adjust the volume to
your headphones.
2. Open Maestro and locate the volume knobs in the
upper-right corner of the window.
3. Press the Headphone
Output knob to toggle
the Headphone Output
muteonando.
3. Drag the headphone 1
or Headphone 2
volume knob up or down to adjust the headphone
volume level.
4. Click the
mute button next to the Headphone 1
or Headphone 2 volume knob to toggle
theHeadphoneoutputmuteonoro.

Apogee ensemble Specifications

General

Type	Audio Interface
Simultaneous Channels	36
Phantom Power	Yes
Word Clock	Yes
Bit Depth	24-bit
Digital Inputs	ADAT, S/PDIF
Digital Outputs	ADAT, S/PDIF
Connectivity	FireWire
Inputs	8 analog
Outputs	8 analog