Apogee ensemble Quick Start Guide

Ensemble Quick Start Guide | 25
Using Maestro’s Mixer for Direct Monitoring (Cont’d)
You can control the amount of input signal verses software playback volume heard using the Maestro Mixer controls:
5. Select the Mixer tab (or use the keyboard
combination [command 6]).
6. Select “Mixer 1”.
7. Adjust the level of input
heard by adjusting the
Input Fader.
8. Adjust the audio playback
level from software with
the Software Return Fader.

Apogee ensemble Specifications

General

Type	Audio Interface
Simultaneous Channels	36
Phantom Power	Yes
Word Clock	Yes
Bit Depth	24-bit
Digital Inputs	ADAT, S/PDIF
Digital Outputs	ADAT, S/PDIF
Connectivity	FireWire
Inputs	8 analog
Outputs	8 analog