Applied Precision WS 2120 User Manual

Working Standard
User’s Guide
www.appliedp.com WS-UGFW619-EN
89
MEAS:POW:AC:APP:PRIM?
Request for primary apparent power values.
MEAS:POW:AC:FACT?
Request for power factors.
MEAS:POW:AC:SUM:ACT?
Request for sum of active powers.
MEAS:POW:AC:SUM:ACT:PRIM?
Request for sum of primary active powers.
MEAS:POW:AC:SUM:REAC?
Request for sum of reactive powers.
MEAS:POW:AC:SUM:REAC:PRIM?
Request for sum of primary reactive powers.
MEAS:POW:AC:SUM:APP?
Request for sum of apparent powers.
MEAS:POW:AC:SUM:APP:PRIM?
Request for sum of primary apparent powers.
MEAS:POW:AC:PH?
Request for active power of harmonics.
MEAS:FREQ?
Request for frequency.
MEAS:FREQ:DEF{<def_freq>}
Setting the default frequency. Parameter is 0 (50Hz) or 1 (60Hz).
MEAS:FREQ:DEF?
Request for default frequency. Answer is: 0 (50Hz) or 1 (60Hz).
MEAS:FREQ:CHAN?
Request for channel at which the frequency was measured. Answer is channel number (1 – 6).
MEAS:FREQ:MOD?
Request for frequency measuring mode. Answer is either 0 (automatic) or 1 (fixed freq).
MEAS:FREQ:MOD {<mode>}
Setting of frequency measuring mode. Parameter is either 0 (automatic) or 1 (fixed freq).
MEAS:FREQ:MOD:VAL?
Request for frequency in fixed frequency measuring mode. Answer is frequency in Hz.
MEAS:FREQ:MOD:VAL {<freq>}
Setting of frequency in fixed frequency measuring mode. Parameter is frequency in Hz.
MEAS:FREQ:MOD:CHAN?
Request for channel of frequency measurement. Answer is 0 (auto), 1 – 6 (channel).

Applied Precision WS 2120 Specifications

General

Brand	Applied Precision
Model	WS 2120
Category	Measuring Instruments
Language	English