5 MENUS AquaLab
5 Menus
At the top of the display screen there are three tabs: Measurement,
Configuration, and Data. These tabs indicate the three menus you
can access. To change between the tabs press the right most button
below the Menu icon.
The enter icon is the Read or Enter button. Once the latch is set to
the Read position, the Menu icon switches to an “X” icon, which al-
lows the user to stop the current reading. During a reading, pressing
Enter again restarts the reading.
5.1 Measurement Tab
The Measurement tab, as seen above, is the main screen which dis-
plays each time you turn on your AquaLab. If this screen does not
appear, refer to Section 12 for troubleshooting instructions. As men-
tioned earlier, the water activity and sample temperature are dis-
played on the screen.
Pushing the right or left arrow keys changes the display to a tem-
perature equilibration screen. This screen shows the temperature
difference between the sample temperature and the lid temperature.
18