AquaLab 6 CLEANING AND MAINTENANCE
6 Cleaning and Maintenance
Keeping your AquaLab clean is vital to maintaining the accuracy
of your instrument. Dust and sampling debris can contaminate the
sampling chamber, so you must regularly clean your instrument. To
clean your instrument, carefully follow these instructions and refer
to the labeled diagram in Figure 2. Decagon Devices recommends
you send your AquaLab in for annual factory calibration.
Figure 2: AquaLab Instrument Diagram
Purpose
The purpose for the cleaning procedure is to remove grease, dirt
and other soluble substances which can absorb or release water dur-
ing verification, calibration, and/or sample testing. For a smooth
31
To Next Page
Loading...
