AquaLab 7 VERIFICATION AND CALIBRATION
offset, and applying a multi-point calibration, contact Decagon
by email at support@aqualab.com or by phone at 509-332-5601
for further instructions. If you purchased your Decagon instru-
ment from one of our international distributors, please contact
them for local service and support.
7.4 How to Restore Factory Defaults
To restore original calibration settings, do the following:
1. Toggle to the Configuration tab by pressing the Menu icon
button. Select Calibration and press the Enter button (Select
water activity for DUO models.)
2. Scroll down to Defaults and press the Enter icon button to
access the Restore Factory Defaults routine. To cancel and re-
turn to the main menu, press the cancel button. After pushing
the Enter icon button, the Default screen prompts you to reset
defaults.
Note: For TEV models make sure you have the correct sensor
selected.
47
To Next Page
Loading...
Need help?
General
