18
User guide - Shower head operation
NEVER ATTEMPT TO MAKE ANY ADJUSTMENT TO THE SHOWER HEAD BY PULLING ON THE SHOWER HOSE.
1 To select the preferred height for the shower head, depress the handset holder levers fully to enable the
slider to be moved up or down the rail.
2 Angular adjustment is made by carefully but firmly pulling forwards or pushing back the shower head
against the knuckle in the holder.
3 To select the desired spray pattern rotate the shower spray plate clockwise or anti-clockwise.
Shower head cleaning and maintenance
Your Opto shower head system should be cleaned using only a soft cloth and washing up liquid.
DO NOT USE ABRASIVE CLEANERS.
To reduce the requirement for chemical descaling in hard water areas, the shower heads incorporate rub clean teats.
Any scale build up that may occur in any of the holes can be broken down by gently rubbing the flexible tips of the jets during use.
Should chemical descaling of the head become necessary, remove the shower head and fully immerse in a mild proprietary
descalent.
IT IS IMPERATIVE THAT DESCALING IS CARRIED OUT STRICTLY IN ACCORDANCE WITH THE MANUFACTURERS
INSTRUCTIONS. SUBSTANCES THAT ARE NOT SUITABLE FOR PLASTICS AND ELECTROPLATED SURFACES MUST
NOT BE USED.
To Next Page
Loading...
