Aquatronica evolution ACQ110 - Power Unit Menu; Power Unit; Change Name

28 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Power Unit Menu
Power Unit (Fig. 22)
Thismenuallowstheusertocarryoutallthesettingsand
programsdesiredonthepowerunitsconnectedtothesystem.
NOTE: if more than one power unit is connected, a screen
will appear which allows the user to select the desired
power unit by using the keys . Press “Enter” to
conrm.
To select these parameters, proceed as follows:
Main screen  Main Menu  Power Unit.
Change Name (Fig. 23)
Modiesthenameofthepowerunitsandtheirplugs.
To modify the name of the Power Unit, proceed as follows:
Main screen  Main Menu  Power Unit  Change Name.
•SelectthePowerUnitmenuwithkeys and press “Enter”.
•Selecttheletterswithkeysandusekeystomove
insidetheword(E.g.Fig.24).Press“Enter”toconrm.
Tomodifythenameoftheplugs,proceedasfollows:
Main screen  Main Menu  Power Unit  Change Name.
• Select the “Plugs”menuwithkeys and press “Enter”.
•Selecttheplugwhosenameistobemodiedwithkeys
(seeFig.25)andpress“Enter”.
•Selecttheletterswithkeysandusekeystomove
insidetheword(E.g.Fig.24).Press“Enter”toconrm.
(Fig. 22)
Power Unit
(Fig. 24)
Skim_
(Fig. 23)
Change Name
Power Unit
Plugs
(Fig. 25)
Plug Selection
A A
B B
C C
D D
E E
Change Name
Manual Commands
Program Timer
Wave Effect
Tide Effect