Aquatronica evolution ACQ110 - Insert; Program Timer

30 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Power Unit Menu
Program Timer
Thismenuletsyoumakeallthesettingsallowingoneormore
timedprogramstoberun;itis,infact,possibletoselectthe
startandendtime,andthedayoftheweekwhentheselected
output has to be enabled.
Tosetatimerprogram,proceedasfollows:
Main screen  Main Menu  Power Unit  Program Timer.
• Select the output to program with keys  (Fig. 30)
and press “Enter”.
Insert (Fig. 31)
Allowsthe user to insertone or more programsinsidethe
selected output.
To modify this option, proceed as follows:
Main screen  Main Menu  Power Unit  Program Timer 
Insert.
•Setthestarttime(“From”)andendtime(“To”)atwhich
theoutputisenabled.Selectthedesiredoptionwithkeys,
whilemodifyingthevalueswithkeys.
• Set the “ON” and “OFF”(0÷600minutes)valuesthatallow
youtogetrepetitiveonandoffbasedonthetimessetwithin
thetimeframesetabove;selectthedesiredoptionwiththe
keys,whereasyoucanchangethevaluewiththekeys.
•Setthedaysoftheweekinwhichtheoutputisenabled.
Selectthedaywithkeys whilewithkeys render it
activeornon-active.
Whenallsettingsarecomplete,press“Enter”.
Example 1
Intheexampleshowninthegure(Fig.32)aprogram(Neon)
hasbeencreatedwheretheneonturnsonat14.25andturns
offat19.25everydayoftheweek.
Example 2
Intheexampleshowninthegure(Fig.33),programming
(Pump)forwhichthepumpturnsonfor20minutesandturns
offfor40minutesrepetitivelystartingat10:30andrunning
until18:30everydayexceptSaturdaywasmade.
(Fig. 31)
Neon
(Fig. 30)
Plug Selection
A Neon
B Pump
C C
D D
E E
(Fig. 32)
Neon
From 14:25 To 19:25
ON 0m OFF 0m
Mo Tu We Th Fr Sa Su
(Fig. 33)
Pump
From 10:30 To 18:30
ON 20m OFF 40m
Mo Tu We Th Fr Su
Insert