EasyManua.ls Logo

Aquatronica evolution ACQ110 - Delete All; Insert; View;Mod;Del

Aquatronica evolution ACQ110
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Level Menu
Insert (Fig. 79)
Inthiswindowitispossibletomodifythestateoftheplugsde-
pendingonthelevelsreadbythesensor(LEV1orLEV2).
Tosetthisprogram,proceedasfollows:
Main screen Main Menu Level Programs Insert.
Selectthestateofthesensor(OFF,LEV1,LEV2)byusing
thekeys.
Settheminimumtime(inseconds)ofprogramactivation
independently from the sensor status.
Set the maximum time (in seconds) which the output,
selectedafterwards,mustremainactive;usethekeys
tomodifythevalue.
Selectwithkeys the output which is to be utilized while
usingthekeystomodifyitsstate;itispossibletochoose
whentoactivate(outputhighlightedwithsymbolabove)or
deactivate(onlywiththesymbolabove)theoutputsincorre-
spondencetothestateofthelevelsensorselectedabove.
When completed press “Enter”tomemorizetheprogram.
Show/Modify/Delete
Seepage31.
Delete All
Seepage31.
Theexampleindicatedingure(Fig.80)showstheactivation
oftheautomatictopoffpumponplug“C”:wheneverthelevel
sensormovestothepositionLEV1,output“C”isactivated
(whichactivatestheautomatictopoffpump).
Ifthelevelsensor’sstatedoesnotchange(returnstoposition
LEV2)insidethesettime(MaxTime)theprogramisblocked
andthecontrolunitdisplaysanerrormessage.
Onthemainscreenthesymbol will appear, accompanied
by an acoustic signal; which indicates an anomaly in the
automatictopoffsystem,suchasadamagedlevelsensoror
pump,orperhapstheabsenceofwaterinthe“hopper.
Intheeventofananomaly,thefollowingmessagewillappear
(Fig.81)whichwillconsequentlyblocktheprogram.
(Fig. 79)
Programs
OFF
Minimum time 0s
Max Time: OFF
PU01 A B C D E F
(Fig. 80)
Programs
LEV 1
Minimum time 5s
Max Time: 10s
Automatic topoff pump
PU01 A B C D E F
(Fig. 81)
Sensor program
error:
Level