Aquatronica evolution ACQ110 - Page 41

41 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Function Setting
Inthisexample,ifthepHgoesabove8.0(7.9+0.1),5mlofpHMinusaredosedintothewaterat
24hintervals.Ifthevaluegoesbelow7.9,dosingautomaticallystops.
TheXYprogramscanbeusedforthepowerunitsaswellasanydosingpumpsconnectedtothe
system.
Aprogramforthepumpsisshownbelow.
Variable Setting
Program
Function 1
Dosing pumps
pH Minus
Every: 24h00m
Milliliters: 5
Variable 1
pH >
Ref. 7.9
+ 0.1
V1: PH
V2: Undened
A1: PH Minus
A2: Undened
A3: Undened
Max. time OFF
From: 08.00 To: 12.00
Link Settings/Dosing Pump Actions