Page 32
2. Receiver STATUS Light Indication
Type Display Type (Green & Red) Indication
1
Fast green blinks Decoding in process
2
Slow green blinks Decoding on standby
3
Slow red blinks
Stop command initiated with receiver
MAIN deactivated
4
Two red blinks Receiver MAIN jammed or defective
5
Fast red blinks Incorrect transmitter serial number/ID code
6
Constant red Receiver under-voltage, LV output relay activated
7
No light displayed Decoding microprocessor is defective
3. Receiver SQ Light Indication
Type Display Type (Red) Indication
1
On Transmission received
2
Off No transmission
3
Blinks intermittently Other radio interference
4. Receiver POWER Light Indication
Type Display Type
(Red) Indication
1
On Power to receiver
2
Off No power to receiver
5. Receiver COM Light Indication
Type Display Type (Red) Indication
1
On Power to relay Board
2
Off No power to relay board
To Next Page
Loading...
