Arcam P429 - P429 Specifications

E-14
Continuous power output (20Hz–20kHz at 0.2% THD), per channel
ST (stereo) and DM (dual mono) modes
Four channels driven, 4 / 8, 20Hz–20kHz 125W / 90W
One channel driven, 4 / 8, 1kHz 180W / 110W
BR (bridged) mode
Two channels driven, 8, 20Hz–20kHz 270W
One channel driven, 8, 1kHz 320W
Harmonic distortion, 80% power, 8 at 1kHz 0.002%
Inputs
ST (stereo) and DM (dual mono) modes
Input sensitivity for 100W / 8 0.8V variable down to 7V
Signal/noise ratio (Awtd) ref 100W / 8 112dB
BR (bridged) mode
Input sensitivity for 300W / 8 0.6V variable down to 5V
Signal/noise ratio (Awtd) ref 100W / 8 110dB
Input impedance 10k
Frequency response 20Hz20kHz ± 0.05dB
General
Mains voltage 110–120V~ or 220–240V~, 50-60Hz
Power consumption (maximum) 1kW
Dimensions W x D x H (including feet) 433 x 425 x 105mm
Weight (net) 13.5kg
Weight (packed) 15.5kg
Supplied accessories Mains lead
E&OE
NOTE: All specication values are typical unless otherwise stated.
P429
specications
Continual improvement policy
Arcam has a policy of continual improvement
for its products. This means that designs and
specications are subject to change without
notice.