Modifying Schedules Filter 1 and Filter 2
To see and/or modify a Water Care category, use the light button to
the right (button 1) to open the selected Water Care Menu.
Use the arrow buttons to choose a schedule to modify (choice of
economy and lter schedules). Use the light key to move between
parameters. You have several possibilities for the schedule (Mon
– Fri, weekends, every day, or single days). The schedule will be
repeated every week. The time and duration are set in 30 minute
increments. Once you have set the schedule, use button 1 to go
back. Ensure that you have selected the desired Water Care op-
tion in the main Water Care menu.
The ltration schedule shown on the screen will apply to the main ltration pump, most likely pump 1. In stan-
dard water care mode you can set the duration and start time for two lter cycles. To toggle between Filter
cycle 1 and Filter cycle 2 use the up and down keys
Topside functions
Onzen Settings with k500 topside
Set desired Start time, Duration, and Frequency of Onzen™ cycles.
Press the Settings button to enter the settings menu.
Use the Up / Down arrows to navigate to Onzen™ tab.
Press the light key to enter the Onzen™ menu.
Use the light key (to go forward), Pump 1 key (to go back), and the
up/Down keys to change the desired setting.
Press the Pump 1 key to exit out of the Onzen™ menu.
Owners Manual - Classic Series
4747
To Next Page
Loading...
Need help?
General
