PECA 30 / 30 E : programming-configuration
22
ARDETEM
programming of the parameter number to measure on the second indicator
(see the measured parameters list in page 13)
program 0 to switch off an indicator, to switch off a page
program 0 as parameter number on the 3 indicators
power and max. current average on the last 10 minutes
choice of the unit for the displayed measurement :
1 = simple unit 10 3 = KILO 10 6 = MEGA 10 9 = GIGA
decimal point position for the measurement display :
1.000= 3 decimals 1.00= 2 decimals 1.0= 1 decimal 1.= 0 decimal
If the number becomes to big, the decimal point changes by itself
EXAMPLE : with 1 decimal :128,2 will be read, but 5362,3 give 5362
programming of the parameter number to measure on the third indicator
(see the measured parameters list in page 13)
program 0 to switch off an indicator, to switch off a page
program 0 as parameter number on the 3 indicators
capture of the down display scale (for 4mA)
capture of the full display scale (for 20mA)
decimal point position for the measurement display :
1.000= 3 decimals 1.00= 2 decimals 1.0= 1 decimal 1.= 0 decimal
If the number becomes to big, the decimal point changes by itself.
EXAMPLE : with 1 decimal :128,2 will be read, but 5362,3 gives 5362
See the next page
See capture functions Nr1 page 16
back to the main menu
back to the measure
3
1
22
41
1
22
3
1
10 6
350.0
1
22
3
1
1.
1.000
1
22
3
1
10
0.000
1
22
To Next Page
