ARDETEM PECA 30 - Page 23

PECA 30 / 30 E : programming-configuration
23
ARDETEM
... doing the same procedure for the 12 measured parameters to display on 4 pages
configuration of the logic filtering

choice of the global logic filtering

OFF= no filtering Nr1= normal network Nr2= few instabilities
Nr3= unstable network Nr4= network with a lot of instabilities
CAUTION : the logic filtering increases the response time

configuration of display options

alarms on the measurements : active (on) or inactive (OFF)

signification of the alarms in page 43

starting of running time-meter according to :

the voltage presence « dEC.U » or current presence « dEC.I »

auto extinguishing display after 5mn

( the display is reactivated by pressing one key)
active function « YES » or inactive « no »

auto scrolling of the pages (scroll)

OFF= no scrolling Nr1= with 3s between 2 pages Nr2= with 6s
Nr3= with 9s Nr4= with 12s

Configuration of optional boards, next page.

back to the main menu

back to the measurement
dISP.
PAGE
F.num
n°2
FIL.
num.
dISP.
PAGE
F.num
ALAr.
OFF
hou
r
DEC.U
no
AFF.
OFF
OFF
PAGE
ScrL