Arecont Vision AV100 User Manual

ARECONT VISION AV100 VIDEO SYSTEM USER MANUAL
13
Arecont Vision 425 E Colorado St, 7
th
Floor Glendale, CA 91205 Revised 12/20/2010
www.arecontvision.com
www.arecontvision.comwww.arecontvision.com
www.arecontvision.com
configure their IPs and verify their operability. Once the installation is complete, the list of newly installed
cameras will appear in the top panel with the result “Installed, online”. This list can be sorted by the MAC
address or IP address by clicking on the respective column name. The list may also include previously
installed cameras which may be listed as “Installed, online” or “Installed, offline”, depending on whether the
camera is still accessible. The installer offers a lock mechanism to protect previously installed cameras (if
any) from accidental changes of their IP address. To change the IP address manually, or type in a description
of the camera (which will be stored on camera), double click on the IP address of the camera and make the
changes. Press the Save/Exit
Save/ExitSave/Exit
Save/Exit button to save the installation information and exit the Camera Installer.
Figure 9. Basic mode

Arecont Vision AV100 Specifications

General

Brand	Arecont Vision
Model	AV100
Category	Security System
Language	English