Areva S2DAT - Page 51

INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE
安装和维护说明手册
D0578-02-ZH
51/100
AREVA T&D S.p.A. – Via Meucci, 22 30020 Noventa di Piave (VE) ITALY – Tel. : 39 0421 309511 – Fax : 39 0421 65254
Subsidiary of AREVA T&D Italy SpA (AREVA group) with registered office in Via Meucci, 22 30020 Noventa di Piave (VE) - ITALY, under Art. 2359 of the Italian Civil Code.
• cover immediately with antioxidant compound;
然后立即用抗氧化剂涂覆。
• connect the surfaces as soon as possible;
尽快连接这些表面。
Surfaces through which wiping-contact current flows (e.g. mobile contact blades)
must be covered with a thin layer of grease NYOGEL 760G (to be restored at each
inspection).
磨擦接触电流通过的表面（如动触头的触片）必须覆盖一层 NYOGEL 760G 薄脂（每
次检查时复涂）。