Argo I Series User Manual

EN
5
ON/OFF BUTTON
Press this button to turn the air conditioner
ON / OFF.
Press for 2 seconds to lock / unlock the
buttons
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
COOLING
The air conditioner makes the room
cooler.
HEATING
The air conditioner makes the room
warmer.
DEHUMIDIFYING (DRY)
The air conditioner reduces the humidity
in the room.
FAN
The air conditioner works only as a
circulation fan.
AUTOMATIC
When this setting is selected, the unit
calculates the difference between
the thermostat setting and the room
temperature and automatically switches
to the “cooling” or “heating” mode.
A
REMOTE CONTROL UNIT
DISPLAY
Information described below is displayed:
Operation mode
Fan speed
I FEEL mode
Night mode
Timer: 3 types + delayed timer
Cooling
Dehumidification
Fan
Automatic
Clock
A
TRANSMITTER
When you press the buttons of the
remote control unit, the mark
appears on the display to transmit
the setting changes to the receiver
in the air conditioner.
CLOK AND TIMER SETTING BUTTON
Press this button in order to select the
desired timer.
Press for 2 seconds to set the timer
For details refer to paragraphs “HOW
TO SET THE PRESENT TIME”, “TIMER
SELECTION”, and “SETTING THE TIMER”.
35*+
9+:
:[XHU
+IU
4OMNZ
,ORZKX
:OSKX
2OMNZ
S
1
M
W
T
T
F
S
AUTO
WEEK
SET
2
3
A
TEMPERATURE SETTING BUTTONS
(cooler)
Press this button to decrease the set
temperature.
(warmer)
Press this button to increase the set
temperature.
USE THESE BUTTONS ALSO TO SURF
THROUGH TIMER AND PARAMETERS’
SETTING
SENSOR
A temperature sensor inside the remote
control unit detects the room temperature.
(see on the back of the remote control unit)
IFEEL MODE
Press this button for a few seconds to
modify the temperature sensor selection
(from remote controller to air conditioner
and viceversa).
FILTER BUTTON
Press this button in order to activate the air
ionizer built into the unit
NIGHT BUTTON
Press this button in order to select the
NIGHT mode.
FLAP BUTTON
Press this button in order to select the
desired flap operation.
Fixed: six position
Continous oscillations
Automatically oscillations
(cooling-heating)
TURBO BUTTON
Press this button
in order to select
the TURBO mode.
ECO BUTTON
Press this button in order to select the ECO
mode.
S
1
M
W
T
T
F
S
AUTO
WEEK
SET
2
3
A
TURBO mode
LIGHT BUTTON
Press this button to turn
the unit display on or off
Days of the week
(from sunday to saturday)
ECO mode
Temperature
FAN BUTTON
Press this button to change the fan speed.
Fan speed is automatically
selected by the unit.
Low speed
Medium/low speed
Medium speed
Medium/high speed
High speed
Very high speed
AUTO
Flap position
Heating
Celsius o Fahrenheit degrees
Low battery
Buttons’ lock active
Light

Argo I Series Specifications

General

Brand	Argo
Model	I Series
Category	Air Conditioner
Language	English