Argo I Series User Manual

EN
13
USE WITH WIRED CONTROLLER (OPTIONAL-NOT SUPPLIED)
INDOOR 1 23
MENU’ / PARAMETERS
ON/OFF
FAN
BACK LEFT RIGHT
UP / DOWN OK / SETTINGS
OPERATION MODE
ON / OFF Button: Push this button to turn ON / OFF the selected unit (square around the icon number of the unit).
Press it for 2 seconds to turn OFF all the units simultaneously.
OPERATION MODE Button: Push this button to change the working mode.
FAN Button: Push this button to change the fan speed.
MENU / PARAMETER Button: Push this button to enter the main paramters menu .
Press it for 2 seconds to enter the advanced parameters menu (protected by password).
LEFT / RIGHT Buttons: Push this buttons to select indoor units.
UP / DOWN Buttons: Push this buttons to change the setpoint of the selected unit.
BACK Button: Push this button to go back to the previous menu.
OK / SETTINGS Button: Push this button to change the value of the selcted parameter (see PARAMETERS MENU ).
BUTTONS
DISPLAY
This wired controller can be combined with different types of indoor units: for this reason some functions may not be
available.
However, the selection of any functions not available for a certain type of unit does not affect the correct functioning of
the controller itself: simply nothing will happen.
REMOTE CONTROL
IR SIGNAL
RECEIVER

Argo I Series Specifications

General

Brand	Argo
Model	I Series
Category	Air Conditioner
Language	English