12
EN
2. WHEN THE AIR CONDITIONER IS ON
If you want to turn off the air conditioner push the
OPERATION selector until the unit is in standby (red
operating lamp).
Power failure during operation.
In the event of power failure, the unit will stop. When the
power is resumed, the unit will restart automatically after
3 minutes.
NOTE
If you have lost the remote control unit or it has troubles,
follow the steps below.
1. WHEN THE AIR CONDITIONER IS OFF
If you want to turn on the air conditioner push the
OPERATION selector to select the desired mode (COOL
or HEAT).
OPERATION WITHOUT THE REMOTE
CONTROL UNIT
The air conditioner will start in HIGH fan speed.
The temperature setting is 25°C for cooling mode and
21°C for heating mode.
NOTE
OPERATION
selector
To Next Page
Loading...
Need help?
General
