Argon 18 E-119 TRI+ - 7.2 FRONT DERAILLEUR HANGER ASSEMBLY

18
E-119TRI+DISC 345A / 345B: ASSEMBLY GUIDE
Using a single chainring set-up:
1. Apply grease on the thread of the M5 x 16 mm screw (SKU: 81248).
2. Install the cover for a single chainring (SKU: 81501 or 81502 depending on the
artwork) on the frame with one M5 x 16 mm flat head screw.
3. Hand tighten the M5 x 16 mm screw.
M5 x 16mm
81499
M5 x 16mm
7.2 Front Derailleur Hanger Assembly
4
6Nm
2.5
1Nm
4
5.5Nm
4
7Nm
2
HT-1/4
5
12Nm
2
2Nm
3
3Nm
4
3Nm
8
35Nm
2.5
HT
3
HT
40Nm
4Nm
T25
T25
4
3Nm
10
HT
2.5
5
9Nm
2.5
HT-2
2.5
HT-5
2.5
2Nm
3
2.5
HTHT
3
4Nm
3
2Nm
6
10Nm
2.5
HT
4Nm6Nm
8
Using a double chainring set-up:
1. Apply grease to the thread of both M5 x 16 mm screws (SKU: 81248).
2. Install the front derailleur hanger (SKU: 81499) on the frame using
the two M5 x 16 mm bolts.
3. Tighten the two screws to 3 Nm.
Note:
The front derailleur hanger has been designed to work with round and oval
chainrings with 50 to 57 teeth and equivalent max. OD of a round 57T chainring.
81501 (345A)
81502 (345B)
4
6Nm
2.5
1Nm
4
5.5Nm
4
7Nm
2
HT-1/4
5
12Nm
2
2Nm
3
3Nm
4
3Nm
8
35Nm
2.5
HT
3
HT
40Nm
4Nm
T25
T25
4
3Nm
10
HT
2.5
5
9Nm
2.5
HT-2
2.5
HT-5
2.5
2Nm
3
2.5
HTHT
3
4Nm
3
2Nm
6
10Nm
2.5
HT
4Nm6Nm
8