22
E-119TRI+DISC 345A / 345B: ASSEMBLY GUIDE
9.1 front brake assembly
1. Guide the hydraulic housing through the hole in the fork's brake mount recess. It will
come out at the top of the fork.
2. Apply Threadlocker (no. 242) to the threads of the two M5 x 27 mm Front caliper fixing
screws (SKU: 81556).
3. Thread both M5 x 27mm screws to fix the caliper to the fork. Don't tighten yet.
4. The hydraulic housing can be covered with foam liner (SKU: 80811).
81556
M5 x 27mm
To Next Page
Loading...
