39
Set the Parameters
After installing the driver, you can follow the path below to set
parameters:
Start
→ Settings → Printers → Label Dr. → Properties
The parameters include:
Ports Select the IO port to link with the printer. The port may be one of
parallel (LPT), serial (COM), network port or file.
Paper size Select the proper size on the menu. If there is no desired
size, select "Custom" to define the paper size.
Orientation Set portrait or landscape according to the print direction.
Paper source (Media type) T/T stands for thermal transfer (ribbon)
mode and D/T for direct thermal mode (without ribbon).
Media choice (Darkness) Set the heat value or darkness from this
field. The darkness value ranges from 0 to 15.
Copies This function designates the number of printed copies of each
page.
More option (Accessory setting) To use the cutter and peeler
function you still need to enter More Options and select one of the items.
Device options (Speed) Set the print speed. For the A-200, the
speed ranges from 1 to 4 IPS, for the A-150 ranges from 1 to 3 IPS.
40
For Win 98 / ME
❑ Ports
Properties menu
→ Click "Details".
→ Select the IO port.
→ Click "OK".
❑
Paper size
❑ Orientation
❑ Paper source
(Media type)
❑ Media choice
(Darkness)
❑ Copies
Properties menu
→ Click "Paper".
→ Click each item to select
desired parameter.
→ Click "OK".
To Next Page
Loading...
