99
Code 39
C39_FullASCII_conversion
Code 39 Full ASCII is a variant of Code 39. It
allows the whole ASCII table (128 characters)
to be encoded.
C39_length_min, C39_length_max
See the description in Code 11.
C39_checkdigit_verify
See the description in Code 11.
C39_checkdigit_transmit
See the description in Code 11.
Buffer_C39
It allows your scanner stores multiple Code 39
bar codes in the buffer. When it is turned on,
it buffers all Code 39 bar codes having a
leading space as a first character for later
transmission. The leading space is not
buffered. Decoding a Code 39 bar code with
no leading space sends all buffered data in a
first-in, first-out sequence, plus the
“triggering” bar code.
Tcode39_enable
Trioptic Code 39 is a variant of Code 39. It
consists of six data characters and two dollar
signs ($) as the start and stop character. For
example, the data “$Argox$” is read as
“Argox.”
Note You can’t turn on Trioptic Code 39 and
Code 39 Full ASCII simultaneously.
To Next Page
Loading...
